Honda BFP8D Owner's Manual page 58

OPERATION
Keep away from moving parts
while pulling the rope.
If necessary, rewind the rope and
pull again. If the engine does not
start after several attempts, refer to
TAKING CARE OF
UNEXPECTED PROBLEMS,
on p. 101.
Exposed moving parts can cause
injury.
• Do not operate the outboard
motor without the engine
cover.
• Use extreme care when
installing the engine cover.
56
7. If the choke and fast idle control(s)
were used to start the engine, return
the control(s) to the normal
operating position as the engine
warms up.
During the warm-up period, check
the oil pressure indicator (p. 33),
overheat indicator (p. 33), and
cooling system indicator (p. 34).
8. Leave the recoil starter assembly
off, but install the engine cover
(p. 74), and lock it in place by
latching the engine cover latch.
9. If it was necessary to remove the
emergency stop switch lanyard
from you to perform the emergency
starting procedure, be sure the
lanyard is attached securely to
operator before operating the
outboard motor.
10. Have your closest authorized
Marine dealer check your
electrical system and correct the
problem so that you can use the
electric starter.
The recoil starter assembly
(p. 55) should be reinstalled after
the electric starter is working
again. Install the recoil starter
assembly with the engine
stopped.