World Time
World Time lets you look up the current time
in any one of 48 cities around the globe, and
UTC (Coordinated Universal Time).
Checking World Time
1.
Enter the World Time Mode.
Navigating Between Modes
l
Entering the World Time Mode displays
the city code of the currently selected
World Time city.
Each press of (D) scrolls through city
●
codes.
Press (A) to display the World Time City
●
date. The timekeeping display will
reappear after about one second.
For information about city codes, see
●
the information below.
City Table
l
City code
Watch Operation Guide 5715
Specifying a World Time City
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Press (D) to display the city code of the
currently selected city.
Holding down (D) scrolls through
●
settings at high speed.
For information about city codes, see
●
the information below.
City Table
l
3.
If you want to configure the summer time
setting, hold down (A) for at least three
seconds.
[DST] is displayed along with summer
time.
Each time you hold down (A) for at least
●
three seconds, the setting toggles
between standard time and summer
time.
Note
The summer time setting you configure
●
is applied to the currently selected city
only. It does not affect other cities.
City code
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
Before swapping
After swapping
Home Time
World Time
World Time
Home Time
9