Casio G-Shock GMA-S114RX-7A Operation Manual page 8

3.
Keep pressing (C) until the setting you
want to change is flashing.
Each press of (C) moves the flashing to
●
the next setting in the sequence shown
below.
Home City
Summer time
12/24-hour timekeeping
Seconds
Hours
Minutes
Year
Month
Day
Illumination duration
4.
Configure the date and time settings.
To reset the seconds to 00: Press (D).
●
1 is added to the minutes when the
current count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
Watch Operation Guide 5715
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the
Timekeeping Mode.
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least three seconds.
Release the button when the city code
starts to flash.
3.
Press (C) twice.
This causes [12H] or [24H] to flash on the
display.
City code
4.
Press (D) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
12-hour
timekeeping timekeeping
5.
Press (A) to complete the setting
operation.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the
Timekeeping Mode.
24-hour
8