Do not operate the crown or buttons while ー retailer or to an authorized CASIO service Example of Daily Use your watch is submersed in water or wet. center. Hand washing, rain Avoid wearing your watch while in the ー ...
Page 3
Electrostatic charge can cause the display ● to go blank momentarily or cause a rainbow Note that CASIO Computer Co., Ltd. effect on the display. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of your watch or its malfunction.
Watch Operation Guide 5715 General Guide Watch Face and Display Before Getting Indicators Started... ① ② ③ This section provides an overview of the watch ④ ① and introduces convenient ways it can be ⑤ used. ⑥ Watch Features World Time ●...
Watch Operation Guide 5715 Navigating Between Modes Viewing the Face in the Dark Note Each press of (C) cycles between watch The watch has an LED light that you can turn Auto Light is disabled when any one of ● modes.
Watch Operation Guide 5715 Specifying the Illumination Duration ● Time Adjustment Press (C). You can select either 1.5 seconds or three seconds as the illumination duration. Use (D) to change the summer time Use the procedures in this section to adjust the setting.
Page 8
Watch Operation Guide 5715 Keep pressing (C) until the setting you Repeat steps 3 and 4 to select time and Press (D) to select [12H] (12-hour want to change is flashing. date settings. timekeeping) or [24H] (24-hour timekeeping). Each press of (C) moves the flashing to ●...
Watch Operation Guide 5715 Specifying a World Time City Swapping Your Home Time World Time and World Time Use the procedure in this section to select a World Time city. If you are in an area that World Time lets you look up the current time In the World Time mode, press (A) and (B) at observes summer time, you can also in any one of 48 cities around the globe, and...
Watch Operation Guide 5715 Enabling the Hourly Time Alarm Use (B) and (D) to change the hour setting. Signal Holding down (B) or (D) scrolls through ● settings at high speed. The watch will beep when the alarm time is Enter the Alarm Mode.
Watch Operation Guide 5715 Measuring Elapsed Time Stopwatch Enter the Alarm Mode. Navigating Between Modes Enter the Stopwatch Mode. The stopwatch measures elapsed time in units Use (D) to scroll through the alarm ([AL1] Navigating Between Modes of 1/1000 second up to 99 hours, 59 minutes, to [AL4], [SNZ]) and hourly time signal 59.999 seconds (100 hours).
Watch Operation Guide 5715 Measuring a Split Time Measuring Lap Times Specifying the Distance Before measuring speed, specify a distance. Enter the Stopwatch Mode. Enter the Stopwatch Mode. The distance setting range is 0.1 to 99.9. The Navigating Between Modes Navigating Between Modes unit of distance is not specified.
Watch Operation Guide 5715 Viewing the Speed Display Setting the Countdown Start Timer Time When measuring the elapsed time in Stopwatch Mode, the speed value is obtained The timer counts down from a start time The countdown start time can be set in 1- by dividing the specified distance by the specified by you.
Watch Operation Guide 5715 Using the Timer Hand Alignment Other Information Adjustment Enter the Timer Mode. This section provides non-operational Navigating Between Modes information you also need to know. Refer to Strong magnetism or impact can cause the this information as required. time indicated by the analog hands to become Seconds different from the time on the digital display.
Watch Operation Guide 5715 Specifications Other : City Offset St. John’s -3.5 Auto-return Accuracy at normal temperature : Rio de Janeiro Power Supply : ±15 seconds a month Praia CR1220 x 1 Timekeeping : The information in the above table is current ●...
Visit the website below. of time (nine hours, three hours and 15 minutes, etc.)? https://world.casio.com/support/ The city setting is not correct. Select the correct setting. Setting a Home City The current time indicated by the watch is off by one hour or 30 minutes.
Need help?
Do you have a question about the G-Shock GMA-S114RX-7A and is the answer not in the manual?
Questions and answers