Wind; Sensors; Search For Sensors - La Crosse Technology 328-1415 Setup Manual

ALERTS
Triggered Alerts
•
When an alert value is reached, the station
will beep 5 times each minute until out of
the alert range. Press any button to stop
the alert sound.
•
The Alert Icon will remain flashing until out
of the alert range.

SENSORS

Search for Sensors

If you are seeing "NO" or dashes for your outdoor readings, please try the following steps:
1. Hold the TEMP
button to search for your Cyclone Sensor. The Reception Indicator
for either sensor.
2. If after 3 minutes the sensor still isn't connected, bring the sensor inside, install fresh
batteries, then hold the
3. If your outdoor data is still not appearing after these steps, please contact our support staff.
Lost Connection to Thermo-hygro Sensor
INDOOR INDOOR
Humidity Humidity
OUTDOOR OUTDOOR
Current Direction
button to search for your Thermo-hygro Sensor. Hold the
ALERTS and
RAIN RAIN

WIND

SPEED
Top
Speed
Prevailing Direction
WIND
DIRECTION
Active alerts are indicated by the
icons located in their respective sections on the LCD.
Note:
The default setting for alerts is OFF.
LIGHT button together to restart the station.
Lost Connection to Cyclone Sensor
OUTDOOR OUTDOOR
FORECAST
will begin to animate
RAIN RAIN
INDOOR INDOOR
Humidity Humidity
WIND
SPEED
Top
Speed
Current Direction Prevailing Direction
WIND
DIRECTION
and high or low
WIND or RAIN
FORECAST
15