3.
Functional description
The DSM Series is a positive displacement pump. The feed chemical is conveyed by the
rotor squeezing the tube in the direction of flow. No valves are needed for this. This ensu-
res gentle handling of the metered media.
Maximum pressure on suction/inlet side is 0,5 bar (7 psi approx.).
The DSM Series has been designed for safe and uncomplicated operation, as well as
straightforward maintenance.
The DSM Series can be used for many different media. However, this pump type is often
the optimal solution for abrasive, shear-sensitive and viscous media.
Typical areas of use include processes where only a low discharge pressure is required
(max. 2 bar).
3.1.
Main modules:
1.
Drive Unit
2.
Housing
3.
Base frame
2
DSM
1
3
DSM LAB
2
7
1
3