TP-Link Omada DS1016G Installation Manual page 16

Unmanaged/Easy Smart Rackmountable Switches
2. Configure IP address on your PC to make sure the switch and PC are in the same subnet.
If the switch uses an IP address assigned by a DHCP server, set your PC to obtain an IP address
■
automatically from the DHCP server.
If the switch uses the static IP address of 192.168.0.1, configure your PC's IP address as
■
192.168.0.x ("x" ranges from 2 to 254), and subnet mask as 255.255.255.0.
3. Launch a web browser on your PC. Enter the IP address of the switch in the address bar and press
Enter. Log in with admin as both user name and password.
Note:
For certain devices, you may need to change the password the first time you log in, which will
better protect your network and devices.
N ow yo u c a n c o n f i g u re t h e s w i tc h u s i n g t h e We b - b a s e d G U I . Fo r f u r t h e r i n fo r m a t i o n ,
refer to the User Guide. You can find the latest version of this guide on the official website:
https://www.tp-link.com/download-center.html.
Using the Configuration Utility
You can find the configuration utility from the official website: https://www.tp-link.com/download-
center.html.
For detailed information about using the configuration utility, refer to the Easy Smart Configuration
Utility User Guide. You can find the latest version of this guide on the official website: https://www.tp-
link.com/download-center.html.
12 Connection