Detergent Sensors - Champion M2 Series Operation, Cleaning, And Maintenance Manual

DETERGENT SENSORS

Built-in Systems by Champion
• There are two types of built-in detergent systems:
- Inline sensor, detergent injector, detergent pump; and rinse-aid pump (not shown).
- Inline sensor, tank sensor, detergent injector, detergent pump; and rinse-aid pump (not shown).
• Components are shown below.
- Detergent injector is located on the right-side of machine, Fig.10.
- Inline sensor is located on the left-side of machine behind the lower front panel, Fig 10a.
- Detergent pump is located on the left-side of machine behind the lower front panel, Fig.10b.
- Tank sensor, (if equipped), is located inside on the right-side of machine, Fig.10c.
TANK
INTERIOR
INJECTOR
TANK
EXTERIOR
INJECTOR
Detergent injector (right-side)
Fig.10 -
Continued on next page.
BEHIND LEFT
LOWER PANEL
Fig.10a - Inline sensor (left-side)
BEHIND LEFT
LOWER PANEL
DETERGENT PUMP
Fig.10b - Inline Detergent pump (left-side)
Tank sensor (if equipped)
Detergent Sensors
INLINE
SENSOR
Fig.10c -
(right-side)
15