Table of Contents
Advertisement
Navigating in the Home Connect
menu
Briefly press Remote Start until
▶
the display shows the required set-
ting.
Exiting the Home Connect menu
Press and hold Remote Start for
▶
at least 3 seconds.
17.4 Activating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up. → Page 38
¡ The display shows "oFF".
Press
to change the setting.
▶
a The display shows "on" if the Wi-Fi
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows "on" and the
signal strength of the Wi-Fi connec-
tion.
17.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up. → Page 38
¡ The display shows "on".
Press
to change the setting.
▶
a The display shows "oFF" if the Wi-
Fi is deactivated.
17.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up. → Page 38
¡ The display shows "rES".
Press and hold
▶
3 seconds.
a The network settings are reset.
17.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start will be deactivated in
the following circumstances:
¡ The appliance door is opened.
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance door is closed.
¡ The detergent drawer has been
pushed in.
Press Remote Start.
▶
a Remote Start lights up and the
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Press Remote Start.
▶
a Remote Start goes out.
17.8 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
Home Connect en
for at least
39
Advertisement
Table of Contents
