Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WNG25400ES
Summary of Contents for Bosch WNG25400ES
- Page 1 Washer dryer WNG25400ES en Instruction Manual and Installation Instructions...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 42 Intended use Appliance housing/control panel . . . 42 Drum ......42 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility. - Page 7 Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
-
Page 8: Operation
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed. - Page 9 Safety instructions If there is coal dust or flour in Warning Ri s k of expl o si o ns/fi r e! ■ the air around the appliance, Risk of injury! If you support your weight/sit this may cause an explosion. ■...
-
Page 10: Cleaning/Maintenance
Safety instructions Caution! Cleaning/Maintenance Material damage/damage to Warning the appliance Risk of death! If the amount of laundry in ■ The appliance is powered by the appliance exceeds its electricity. There is a risk of maximum load capacity, it electric shock if you come into may not be able to operate contact with live components. - Page 11 Safety instructions Warning Caution! Risk of poisoning! Material damage/damage to the appliance Poisonous fumes may be given off by cleaning agents that Cleaning agents and agents for contain solvents, e.g. cleaning pretreating laundry (e.g. stain solvent. removers, prewash sprays, etc.) Do not use cleaning agents that may cause damage if they contain solvents.
-
Page 12: Environmental Protection
Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient. -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Installation Surface
Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■... - Page 15 Positioning and connecting Keep the screws and sleeves in b) Remove the sleeves. Note: a safe place. Fit the covers. Take the hoses out of the holders. Lock the covers firmly in place by applying pressure to the snap-in hooks. Unscrew and remove all four transport brace screws.
-
Page 16: Removing The Support Struts
Positioning and connecting Removing the support struts Hose and cable lengths Connection on left side Unscrew and remove all screws in the vertical transport struts. Remove the transport struts. ( ~ 130 cm 0 ~ 150 cm 8 ~ 90 cm @ 60 cm ~ 100 cm Connection on right side Undo and remove the screws on the... -
Page 17: Water Inlet
Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve). -
Page 18: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure. -
Page 19: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Risk of death! Incorrect levelling may result in intense noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a wrench, Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the i Algodón/Algodão 90°C (Cottons supply hose. - Page 21 Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 a) Clip the mains cable securely in Pour approx.
-
Page 22: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 23: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 34 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 35 Inicio/Pausa + Carga (Start/ Reload) button for starting, interrupting, (e.g. -
Page 24: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Tipo secado (Drying Aim) ¾/»/ö Display Setting Description Antimanchas (AntiStain) °/¶/º/· — - 90° Temp.°C Temperature that T Prelav. (Prewash) can be set in °C p Fácil (Reduced Ironing) —... -
Page 25: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 26: Preparing Laundry For Drying
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■... -
Page 27: Detergents And Care
Detergents and care products Notes Detergents and care Only use liquid detergents that are ■ products self-flowing Do not mix different liquid detergents ■ Do not mix detergent and fabric Y ou can protect your appliance and ■ softener D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the Do not use products which have correct detergents and care products. -
Page 28: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 29 Overview of programmes Programme/Type of laundry Options/Information Eco 40-60 10,0 kg/6,0 kg Suitable for washing normally soiled cotton,linen and mixed fab- ric textiles, and drying it to be immediately stored in a cupboard. 400 - 1400 rpm Notes Antimanchas (AntiStain), T Prelav. Textiles which are washable based on the laundry symbol ■...
- Page 30 Overview of programmes Programme/Type of laundry Options/Information 2 Hygiene Care 4,0 kg/2,5 kg An innovative program, pretreat dry laundry by hot air (up to — - 30 °C 65°C) to for additional hygienic demands, followed by a low 400 - 1400 rpm temperature washing cycle.
- Page 31 Overview of programmes Programme/Type of laundry Options/Information p Lana/Lãs (Wool) W 2,0 kg/1,0 kg Hand- or appliance-washable fabrics that are made of wool or — - 40 °C contain wool; 2 - 800 rpm particularly gentle wash programme to prevent laundry from shrinking, with longer pauses in the programme (during which the items rest in the water).
- Page 32 Overview of programmes Programme/Type of laundry Options/Information ‰ Secar suave (Gentle Dry) -/2,5 kg Single gentle dry programme for drying garments with lower temperature, - by selecting ¾ to achieve automatic cupboard+ dry result, - by selecting » to achieve automatic cupboard dry result, Tipo secado (Drying Aim) è...
-
Page 33: Drying Table
Overview of programmes Drying table Estimated drying time (min) Recommended drying programme Drying load ö (Iron » (Cup- ¾ (Cup- (kg) dry) board dry) board dry+) 1.0-2.0 45-60 50-80 65-100 ‰ Secar intensivo (Intensive Dry) 2.0-4.0 60-90 80-140 100-160 4.0-6.0 90-140 140-200 160-270... -
Page 34: Programme Default Settings
Programme default settings Terminado en/em (Finish in/ Programme default Time Dry) settings Before starting the programme, you can preselect the programme end Y ou can change the default settings for P r o g r a m m e d e f a u l t s e t t i n g s ("Finish in"... -
Page 35: Additional Programme
Additional programme settings The drying process would proceed Additional programme followed washing process when the Tipo secado (Drying Aim) activated. If settings you only need the individual drying progamme, you can select ‰ Secar You can find possible additional N ote: intensivo (Intensive Dry), ‰... -
Page 36: T Prelav. (Prewash)
Operating the appliance T Prelav. (Prewash) Operating the Prewash for heavily soiled laundry. appliance Touch T Prelav. (Prewash) to activate P reparing the appliance or deactivate it. O p e r a t i n g t h e a p p l i a n c e The appliance was tested before Put the detergent into dispenser I Note:... -
Page 37: Select Programme/Switch On The Appliance
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different If you have activated the Note: size distribute themselves better childproof lock, you must first deactivate during the spin cycle. - Page 38 Operating the appliance Filling the dispensers Measuring aid A* for liquid detergent *depending on the model Pull out the detergent drawer. Warning Position the measuring aid A for measuring the correct amount of liquid Eye / skin irritation! detergent: If the detergent drawer is opened Pull out the detergent drawer.
-
Page 39: Starting The Programme
Operating the appliance Starting the programme Adding/removing laundry Touch and hold Inicio/Pausa + Carga After starting the programme (only for (Start/Reload) button for 1~2 seconds, washing), you can add or remove then release the button. The programme laundry if necessary. starts and the appliance door is locked. -
Page 40: Cancel The Programme
Operating the appliance Cancel the programme If you do not take laundry out within ■ 15 mins after drying process finished, wrinkle guard process will For programmes washing at high start to prevent laundry getting temperatures: wrinkled. The process lasts about 30 Touch the Inicio/Pausa + Carga minutes. -
Page 41: Appliance Settings
Appliance settings 4: Switching the drum care ■ Appliance settings information signal on/off. Y ou can change the following settings: Ž A p p l i a n c e s e t t i n g s Œ off The volume of the end signal. -
Page 42: Cleaning And Maintenance
Cleaning and maintenance for the appliance may damage the drum Cleaning and and cause injury. Regularly run a programme for cleaning maintenance the drum or wash at temperatures of at least 60ºC. Warning Leave the appliance to dry after every C l e a n i n g a n d m a i n t e n a n c e Risk of death! operation with the door open, and leave... -
Page 43: Drain Pump Is Blocked
Cleaning and maintenance To remove the insert: Push the insert Push in the detergent drawer. upwards from below with your finger. Leave the detergent drawer open Note: so that any residual water can Clean the detergent dispenser tray evaporate. and insert with water and a brush, and dry it. -
Page 44: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Take the drain hose out of the Close the service flap. retainer. Remove the sealing cap and pour the water out into a suitable container. Replace the sealing cap and place the drain hose back in the retainer. To prevent unused detergent Note: from flowing straight into the drain... -
Page 45: Filter In The Water Supply Is Blocked
Cleaning and maintenance Filter in the water supply is Clean the filter with a small brush. blocked Release water pressure in the supply hose: Turn off the water tap. Select the i Algodón/Algodão (Cottons) (activate SpeedPerfect setting) programme. If your appliance with Note: intelligent dosing system , you also... -
Page 46: Faults And What To Do About Them
Faults and what to do about them Caution! Faults and what to do Water damage! about them Any escaping water may cause water damage. E mergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m seen through the glass. - Page 47 Faults and what to do about them Display Cause/Remedy Flashes (no water supply): Water tap turned on? Filter in the water supply is ■ blocked? ~ "Filter in the water supply is blocked" on page 45 Is the supply hose kinked or trapped? Lights up (low water pressure): For information only.
-
Page 48: Faults And What To Do About Them
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the screw fitting on the supply hose. ■ The door cannot be ~~~ (Rinse hold = no final drain) is activated (depending on the ■... - Page 49 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 50 Faults and what to do about them Faults Cause/Remedy The spin cycle runs sev- Not a fault – the unbalanced load detection system is adjusting an imbalance. eral times. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
- Page 51 Faults and what to do about them Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying;...
-
Page 52: Customer Service
Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be... -
Page 53: Consumption Values
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512. -
Page 54: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth) - Page 56 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.