Table of Contents
Advertisement
Dial Interface / Adjust Weight
[Rotate] the dial to toggle between different preset weights.
[Press] Power and the preset starts flashing. Turn the Dial to
adjust the preset weight and [press] Power again to save your
setting.
Toggle Modes
Switch between modes [Press and hold] Power to
see the current mode. [Rotate] the Dial to switch
between Manual and Auto modes. [Press] Power again to save
your setting.
Auto Dosing Mode
[Press and hold] Power for 3 seconds to enter mode settings.
Turn the Dial to select "Auto" and [press] Power to save your
setting. [Press] Dose to enter Ready mode. You can then begin
auto-tare and auto-dosing.
Weighing Only Mode
In weighing mode, the Orion Nano functions as a scale with a 500
g capacity. Place the object on the platform and the weight will
show on the display. The Power and Dose buttons will function
as 'Zero' and 'Tare'.
8
Advertisement
Table of Contents
