Table of Contents
Advertisement
5
Rotate the dial to display [ bELt.p ],
then press Dose, it will be display
[1].
7
Repeat steps 3 to 4 on the second
unit you wish to pair.
9
[ PAir 2 ] will be displayed.
6
Press Dose again to show [ PAir 1 ].
This unit will serve as the master unit.
8
Select [ 2 ] in [ bELt.p ] setting, press
Dose to confirm.
10
Pairing starts automatically.
[ Conn 1 ][ Conn 2 ] will prompt
once the connection is established
and then return to dosing mode.
The link indicator will stop flashing.
14
Advertisement
Table of Contents
