Setting Up the Orion Nano
Initial Setup
1
Rinse and clean the bean hopper
with warm soapy water before your
first use. Dry immediately after
cleaning.
3
Attach the Orion Nano hopper on the
hopper adapter.
2
Place your Orion Nano on a flat, stable
surface.
4
Before dosing, make sure to position
a dosing cup or container beneath
the chute to catch any beans that
might fall when adding them into the
hopper. You will see a spotlight show-
ing the best spot to place your cup
when you turn on the Orion Nano.
6