Table of Contents
Advertisement
Error Codes
Error Code
Description
Error 100
Code error
Error 101
EEPROM error
AD read error
Error 102
Unable to make zero point because the initial weight exceeds the limit (250%
Error 303
of capacity).
Overload: The weight is over the maximum capacity.
Underload: The weight is under the minimum capacity.
Error 304
Please calibrate the Doser in a stable environment free of vibration, wind, etc.
Error 802
Unable to tare because the weight exceeds the tare range.
Unable to tare due to unstable weight.
Error 803
Password error (the default password is 0000).
Error 904
Other
Display Code
Description
The Orion Nano is in Update mode.
Note: The Orion Nano will automatically turn off and exit update mode after
UPdAtE
90 seconds of inactivity.
21
Advertisement
Table of Contents
