Table of Contents
Advertisement
Getting Started
Power On/Off
[Press] Power to turn on device.
[Double press] Power to turn off device.
Start Dosing
[Press] Dose to start dosing, and press again to stop if you want
to end before the session is complete.
Pulse
At the end of dosing, you may [press] Dose several times to
pulse and add a few beans if needed.
Empty Hoper
[Press and hold] Dose to empty the hopper. An 'E' indicator will
appear in the upper left corner of the display. [Press] Dose again
to stop.
Cup Reset
[ CUP ] [ rESEt ] will appear on the display if no container is
detected on the platform. You can dismiss the warning by
pressing Power, and it will not appear again until the Orion Nano
is restarted.
7
Advertisement
Table of Contents
