acaia Orion Nano User Manual page 15

11
Go back to the first unit and enter
the [ bELt ] mode. Rotate the dial
to select [ 1 ] in [ bELt.p ] setting,
press Dose. [ PAir 1 ] will be
displayed.
13
Pairing starts automatically.
[ Conn 1 ][ Conn 3 ] will prompt
once the connection is established
and then return to dosing mode.
The link indicator will stop flashing.
12
Repeat steps 3 to 4 on the third
unit you wish to pair, rotate the dial
to select [ 3 ] in [ bELt.p ] setting,
press Dose to confirm. [ PAir 3 ] will
be displayed.
14
The indicator [ L ] will remain lit on
all units when they are connected
and a [ . ] icon will be shown on the
master unit.
15