Overload Clutch Adjustment Instruction - Pacific Hoists U-MEGA Series Operations Manual & Parts List

7.3 Overload clutch adjustment instructions
This procedure requires professional personnel to operate.
Description
Tool for Overload clutch adjustment
< Open wrench no. 24>
Setting is 125% rated load
1. Remove the
Cover.(
2. Adjust/tighten the screw nut of
clutch by using a wrench. (Illust 3)
3. It can be able to lift in 125% rated
load.
4. Adjust the load to 150% rated load
5. Clutch is slipping, cannot lift,
setting complete.
6. Setting the clutch does not slip
when lifting a load
1).Loosen the adjusting nut, and set
the clutch slip, be unable to lift
the load.
2).Adjust load to 125% rated load,
clutch does not slip and can be
able to lift the load.
3).Adjust the load to 150% rated
load, clutch slip the loading
material.
Setting complete.
7. Setting of overload is 125% rated
load can be able to lift and 150%
rated load have to slip.
Illust 1)
Picture
Illust 1
Illust 2
Illust 3
19
Cover