Set The Alarm Output Function; Alarm Setpoint - A.O. Smith DRE PLUS Installation, User And Service Manual

EN
9.5.1
9.5.2
56
Fig. Alarm output setup submenu

Set the alarm output function

To change the alarm output function:
1. From the Alarm output submenu open the Output function control screen.
2. Change the alarm output function:
a) Use [+] to select the next function.
b) Use [-] to select the previous function.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.

Alarm setpoint

To change the alarm temperature setpoint:
1. From the Alarm output submenu open the Alarm Setpoint control screen.
Installation, Maintenance and Service part