Changing Coffee Temperature; Setting Water Hardness; Programming Coffee; Programming Cappuccino - Electrolux EBC54523AX Instructions Manual

• Make sure the clock on the appliance has been set.•
Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until " START TIME" is displayed.
• Press the OK icon (B9).
• Use the icons (B7) and (B8) to set the auto-start
time, then press the OK icon (B9) to confirm.
• Use the icons (B7) and (B8) to set the minutes, then
press the OK icon (B9) to confirm.
• Press the icons (B7) and (B8) to activate the auto-
start function until " AUTO START" is displayed.
• "AUTO START PLEASE CONFIRM" is displayed. PRESS THE OK
ICON (B9). The symbol appears on the display.
• Press the (B6) icon (B6) to exit the menu.
• To disable auto-start, press the
icons (B7) and (B8) until "AUTO START" is displayed.
Press the OK icon (B9).
"PLEASE CONFIRM" is displayed
Press (B6) to disable, the

Changing coffee temperature

To change coffee temperature, proceed as follows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "TEMPERATURE" is displa-
yed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) to select the required
coffee temperature from low, medium and high.
• Press the OK button (B9) to confirm the temperature selec-
ted.
• Press the icon (B6) to exit the menu.

Setting water hardness

The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• remove the "Total Hardness Test" strip (attached to page 2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "WATER HARDNESS" is di-
splayed.
icon (B2), then the
symbol disappears .
• Press the OK icon (B9).
• Press the icons (B7) and (B8) until the number coin-
cides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message " WATER HARDNESS 3"
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed to provide the desca-
le warning when actually necessary.

Programming coffee

For instructions on programming coffee, see the " CHANGING THE
QUANTITY OF COFFEE IN THE CUP" section.

Programming cappuccino

For instructions on programming cappuccino, see the section
"CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO".

Programming the jug

For instructions on programming the jug, see the section "
CHANGING JUG FUNCTION PARAMETERS".

Programming water

For instructions, see the "CHANGING THE QUANTITY OF HOT WA-
TER" section.
Descaling
Important! Descaler contains acids.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
N.B.: Use the descaler recommended by the manufac-
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When "PLEASE DESCALE !" is displayed, the machine requires
descaling.
Proceed as follows:
• make sure the machine is ready;
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "DESCALE" is displayed.
• Press the OK icon (B9).
The message "ADD DESCALER PLEASE CONFIRM" is displa-
20
EN