Advertisement
Collision Detection
When collision detection is enabled, the
recording interface. If no movement is detected after 5 minutes of recording,
EN
EN
collision detection will be activated with the
screen, and the camera automatically turns off. It will start to record for 1
minute after being shaken, then turn off the dash cam again. If the dash cam
continues to be hit during the collision detection recording, it will exit the
collision detection mode and enter normal recording, restarting the
5-minute entry mechanism. Collision detection sensitivity can be adjusted
from 1 to 5 levels. You can adjust according to your habits, as well as the
surroundings of the car.
Motion Detection
When the motion detection is turned on, the
the recording interface. If no movement is detected after 5 minutes of
recording, the motion detection will be activated with an orange
in the center of the screen, and the screen will turn off after 3 minutes.
When the camera detects object movement, it will automatically trigger
video recording for 30 seconds. After the motion detection recording
ends, the camera will load a 15s pre-recorded video into the 30s motion
1440P +1080P 30FPS
00:00:37
09-01-2023
AM
10:39:07
Collision Detection Icon
- 16 -
icon will be displayed on the
icon in the center of the
ACC
75
HDR
MP/H
icon will be displayed on
icon
Advertisement
