Advertisement
4.7 Parking Mode (Constant Power Supply Needed)
Parking Mode operates as a sentry function under different situations. Please
go to "Record Setup" > "Parking Mode", press
following options: Collision Detection, Motion Detection, Low Bitrate Mode,
Low Framerate Mode, OFF.
After the parking mode is turned on, there are three ways to record:
You can wait for 5 minutes to start automatically.
1.
2.
long press the
Install the Vantrue ACC hardwire kit and the dash cam will directly enter
3.
after the car is stopped the engine (the ACC hardwire kit needs to buy
separately).
NOTE:
To ensure the camera is able to function in Parking Mode, please keep it
•
powered with a mobile power bank or hardwire it directly to the car battery.
•
When the temperature in the car is as high as 60°C(140°F), it is
recommended that you turn off the camera to avoid abnormal operation of
the camera caused by the high temperature.
Parking Mode
Off
Collision Detection
Motion Detection
Low Bitrate Mode
OK
button to begin manually.
- 15 -
button and select the
N E N
N E N E
E
Advertisement
