Sumake SS-1170T Operation Instructions

Operation INSTRUCTIONS

External Mix Air Nozzle Application

OPERATION:

Connect hose as shown in diagram.
Fill cup with strained fluid mixed in accordance with manufacturer's recommendations on label of
container. Fasten cover securely.
Close air adjusting valve by turning clockwise. Set air pressure at oil and water extractor (transformer) to
between 35 and 80 P.S.I., depending upon atomization desired.
Set regulator on pressure cup to approximately 10 P.S.I. for enamels; 5 P.S.I. for lacquers.
(Turn knob clockwise to increase pressure; to reduce pressure, turn knob counter-clockwise. Always
release air in cup by momentarily opening air release valve on cover when attempting to reduce pressure.)
Open air adjusting valve.
With trigger fully pulled back, make several fast spray strokes against a flat surface. After adjustment of
pressure, proper atomization will be indicated by an even distribution of finely divided paint particles.
PLEASE RETAIN FOR FUTURE REFERENCE