1. Manuals
  2. Brands
  3. Sumake Manuals
  4. Paint Sprayer
  5. SS-1180S
  6. Manual

Sumake SS-1180S Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SUMAKE
Specification:
Free Type
Standard Nozzle
Option Nozzle
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Spray Gun
SS-1180S
Pressure
1.0mm
1.8mm, 2.0mm
7-12 CFM
(200-340 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
30-70psi
(2.1-5 kg/cm²) (2.1-5Bar)
2.4 lbs (1.1 kg)
Noise and Vibration:
Vibration
Sound Pressure Level
0.3 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
Remark
Please always
: 72 dB(A)
wear ear
protector at
environment
noise level > 80
: 83 dB(A)
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
SS-1180S-S-1507C-GWF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SS-1180S and is the answer not in the manual?

Questions and answers

Related Manuals for Sumake SS-1180S

Summary of Contents for Sumake SS-1180S

  • Page 1 3/8” (10 mm) dB(A) due to 30-70psi risk of impaired Air Pressure (2.1-5 kg/cm²) (2.1-5Bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 2.4 lbs (1.1 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1180S-S-1507C-GWF...

  • Page 2: Ec Declaration Of Conformity

    DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR SPRAY GUN Model/ Serial No.： SS-1180S to which this declaration applies, complies with these normative documents: ...

  • Page 3: Installation

    OPERATING MANUAL SS-1180 ITEM NO.: 2-1/4 GALLONS PAINT TANK WITH SPRAY GUN & HOSE Description Read Instructions Carefully before using 2-1/4” gallon pressure tank provides pressurized material up to a maximum of 80psi. This tank is equipped with an air regulator, gauge, safety valve, and fluid outlet.
  • Page 4 MAINTENANCE: CLEANING EQUIPMENT 1. Turn off the main air supply to the tank. 2. Relieve all pressure from the tank by pulling the ring on safety valve until the pressure bleeds down 3. Turn T-handle adjusting screw on tank regulator counterclockwise until no spring tension if felt. 4.

  • Page 5: Troubleshooting Chart

    Trouble shooting chart Problem Cause Remedy Air escaping from port on regulator Broken or damaged diaphragm. Replace diaphragm. cap. Pressure creepage registered on Dirty or worn valve sat in regulator Clean or replace valve seat. gauge. Material tends to settle out rapidly. Not enough agitation of material. Increase agitation.

  • Page 6: Parts List

    SS-1170(S) SPRAY GUN SS-1180(S) SPRAY GUN PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1170S-01 Air Nozzle W/Brass Cap 1170S-22 Housing 1170S-04 Fluid Nozzle -1.0 1170S-23 Paint Needle Complete -1.0 1170S-04A Fluid Nozzle -1.8 1170S-23A Paint Needle Complete -1.8 1170S-04B Fluid Nozzle -2.0 1170S-23B...

  • Page 7: Spray Gun

    SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd.
  • Page 8 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
  • Page 9 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
  • Page 10 General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
  • Page 11 NOTE www.SUMAKE.com www.AIRCOMPRESSOR.com.tw...
  • Page 12 NOTE www.SUMAKE.com www.AIRCOMPRESSOR.com.tw...

Table of Contents