1. Manuals
  2. Brands
  3. Sumake Manuals
  4. Paint Sprayer
  5. SS-1140P
  6. Instruction manual

Sumake SS-1140P Instruction Manual

Pressure air spray gun w/o cup (for pressure tank use)
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
SUMAKE
W/O Cup (For Pressure Tank Use)
Specification:
Free Type
Standard Nozzle
Option Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Pressure Air Spray Gun
SS-1140P
Suction
1.0 mm
1.5mm, 1.6mm, 1.8mm,
2.0mm
W/O CUP
7-14 CFM
(200-400 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
30-70psi
(2.1-5 kg/cm²) (2.1-5Bar)
2.31 lbs (1.05 kg)
Noise and Vibration:
Vibration
Sound Pressure Level
0.195 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
Remark
Please always
: 74 dB(A)
wear ear
protector at
environment
: 85 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
SS-1140P-S-1807D-ITF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SS-1140P and is the answer not in the manual?

Questions and answers

Related Manuals for Sumake SS-1140P

Summary of Contents for Sumake SS-1140P

  • Page 1 3/8” (10 mm) dB(A) due to risk of impaired 30-70psi Air Pressure Uncertainty Uncertainty hearing! (2.1-5 kg/cm²) (2.1-5Bar) ² K= 1.5 m/s K= 3dB Net Weight 2.31 lbs (1.05 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1140P-S-1807D-ITF...

  • Page 2: Ec Declaration Of Conformity

    DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： PRESSURE AIR SPRAY GUN W/O CUP (FOR PRESSURE TANK USE) Model/ Serial No.： SS-1140P to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ...
  • Page 3 INSTRUCTION MANUAL FAULTY PATTERNS AND HOW TO CORRECT THEM PROBLEM CAUSE SOLUTION GUN HANDLING Top heavy or bottom heavy pattern: The first requirement for a good resultant finish is the proper handling of the gun. The gun Material buildup on air cap, partially Soak cap or tip in suitable solvent and plugged horn holes, center hole or jets.

  • Page 4: Parts List

    SS-1140P PRESSURE AIR SPRAY GUN, W/O CUP PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1140P 01 1140P-01 Air Cap / Retaining Ring 1 6 Air Cap / Retaining Ring -1.6 1140P 15 1140P-15 Fl id Needle 1 6 Fluid Needle -1.6...

  • Page 5: Spray Gun

    SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd.

  • Page 6: General Safety Rules

    The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
  • Page 7 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.

  • Page 8: Risk Of Injury

    General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.

Table of Contents