Advertisement
Quick Links
SUMAKE
W/ Regulator, Stainless Nozzle & Needle,
W/O Alum. Cup (For Pressure Tank Use)
Specification:
Free Type
Standard Nozzle
Option Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
Pressure Type Spray Gun Only
SS-1140SS/PG
Suction
1.6 mm
1.5mm, 1.6mm, 1.8mm,
2.0mm
1 L
7-14 CFM
(200-400 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
30-70psi
(2.1-5 kg/cm²) (2.1-5Bar)
2.31 lbs (1.05 kg)
PNEUMATIC TOOLS
Noise and Vibration:
Vibration
0.195 m/s²
Uncertainty
K= 1.5 m/s
Noise
Sound Pressure Level
: 74 dB(A)
Sound power level
: 85 dB(A)
Uncertainty
²
K= 3dB
SS-1140SS/PG-S-1807C-ITF
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake SS-1140SS/PG
Summary of Contents for Sumake SS-1140SS/PG
- Page 1 Air Hose (NPS) 3/8” (10 mm) risk of impaired 30-70psi Uncertainty Uncertainty Air Pressure hearing! (2.1-5 kg/cm²) (2.1-5Bar) ² K= 1.5 m/s K= 3dB Net Weight 2.31 lbs (1.05 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1140SS/PG-S-1807C-ITF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： PRESSURE AIR SPRAY GUN ONLY W/STAINLESS NOZZLE & NEEDLE, W/O ALUM. CUP Model/ Serial No.：... - Page 3 INSTRUCTION MANUAL FAULTY PATTERNS AND HOW TO CORRECT THEM PROBLEM CAUSE SOLUTION GUN HANDLING Top heavy or bottom heavy pattern: The first requirement for a good resultant finish is the proper handling of the gun. The gun Material buildup on air cap, partially Soak cap or tip in suitable solvent and plugged horn holes, center hole or jets.
-
Page 4: Parts List
SS-1140SS/PG PRESSURE TYPE SPRAY GUN ONLY W/ STAINLESS STEEL NOZZLE & NEEDLE, W/O ALUM. CUP (FOR PRESSURE TANK USE) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1140P-01 Air Cap / Retaining Ring -1.6 1140P-15 Fluid Needle -1.6 1140P-01B Air Cap / Retaining Ring -1.5... -
Page 5: Spray Gun
SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd. - Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
- Page 8 General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-1140SS/PG and is the answer not in the manual?
Questions and answers