Table of Contents
Advertisement
Quick Links
SUMAKE
H.V.L.P. Spray Gun, 1000 c.c. Cup
(Suction Type) Water Born Paint
Specification:
Free Type
Standard Nozzle
Option Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
SS-1113WHS
Suction
1.5 mm
1.3mm, 1.7mm, 1.9mm,
2.2mm
1 L
8.8 CFM (249 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
43 psi (3 kg/cm²)
3.02 lbs (1.37 kg)
Noise and Vibration:
Vibration
Sound Pressure Level
< 2.5 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
Remark
Please always
: 70 dB(A)
wear ear
protector at
environment
noise level > 80
: 81 dB(A)
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
SS-1113WHS-S-1906B-GWF
Advertisement
Table of Contents
Related Manuals for Sumake SS-1113WHS
Summary of Contents for Sumake SS-1113WHS
- Page 1 Air Hose (NPS) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 43 psi (3 kg/cm²) hearing! ² K= 1.5 m/s K= 3dB Net Weight 3.02 lbs (1.37 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1113WHS-S-1906B-GWF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： HVLP SPRAY GUN W/1000CC CUP (SUCTION TYPE) WATER BORN PAINT Model/ Serial No.： SS-1113WHS to which this declaration applies, complies with these normative documents: ... -
Page 3: Troubleshooting
Prior to operation read the operating instructions carefully. Operation Personal protective equipment The SPRAY GUN has been designed as a hand head, air operated tool, and in the interests of safety must The use of breathing mask is recommended at all limes when spraying. The noise level may exceed 85dB(A) only be used for the purpose for which it has been designed. -
Page 4: Parts List
SS-1113WHS HVLP SPRAY GUN W/1000CC CUP(SUCTION TYPE)WATER BORN PAINT PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1113W-01 Air Nozzle W/Brass cap 1113-17 Spring 1113W-02A Fluid Nozzle 1.3 1113-18 Valve 1113W-02B Fluid Nozzle 1.4 1113-19 Screw 1113W-02C Fluid Nozzle 1.5... -
Page 5: Spray Gun
SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd. -
Page 6: General Safety Rules
The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use. - Page 7 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
-
Page 8: Risk Of Injury
General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-1113WHS and is the answer not in the manual?
Questions and answers