AEG NII84B10AB User Manual page 83

The function stays active when you
deactivate the hob. The indicator above
is on.
To deactivate the function: press
not set any heat setting. Press and hold
for 3 seconds, until the indicator above the
symbol disappears. Deactivate the hob with
.
Cooking with the function activated: press
, then press for 3 seconds, until the
indicator above the symbol disappears. You
can operate the hob. When you deactivate
the hob with the function operates again.
7.5 Bridge
The function operates when the pot
covers the centres of the two zones. For
more information on the correct
placement of cookware refer to "Using
the cooking zones".
The function does not work while
SenseBoil® operates.
This function connects two left side cooking
zones and they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch
change the heat setting touch one of the
control sensors.
To deactivate the function: touch
cooking zones operate independently.
7.6 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the remote system
is originally deactivated. Activate it before
you use the function. For more
information refer to hood user manual.
. Do
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
Automatic modes
H0
H1
3)
H2
H3
H4
H5
H6
1)
The hob detects the boiling process and activates
fan speed in accordance with automatic mode.
. To set or
2)
The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3)
This mode activates the fan and the light and does
not rely on the temperature.
. The
Changing the automatic mode
1. Deactivate the hob.
2. Press
comes on and goes off.
3. Press
4. Press
5. Press
automatic mode.
Automat‐
Boiling 1)
ic light
Off Off
On Off
On Fan speed
1
On Off
On Fan speed
1
On Fan speed
1
On Fan speed
2
for 3 seconds. The display
for 3 seconds.
a few times until H comes on.
of the timer to select an
ENGLISH
Frying 2)
Off
Off
Fan speed
1
Fan speed
1
Fan speed
1
Fan speed
2
Fan speed
3
83