Page 1
Deck Bath Shower Mixer Fitting instructions Please note: Tap head shown is for illustration purposes only. Please keep these instructions for future reference and request of replacement parts.
Page 2
We have taken great care to ensure that this product reaches you in perfect condition. However should any parts be damaged or missing please contact your point of purchase. This does not affect your statutory rights. In addition if you require replacement parts your point of purchase will be happy to assist.
Page 3
Tools required (Tools not supplied) Parts Supplied Description Tap Body Washer Anti-Rotational Washer Backnuts Wall Bracket Shower Hose Handset Specifications The taps is suitable for use at water supply pressures of 0.2 bar (min.) to 5 bar (max.). This pressure rating is determined by the manufacturer using soft water under test house conditions and may differ to the retailer´s recommendation.
Page 4
Installation 1. Fit Tap Body (1) to bath, ensuring that the Washer (2) is fitted between the Tap Body (1) and the bath. 2. Fit Anti-Rotational Washer (3) over inlet legs. Then fit Backnuts (4) to the inlet legs and tighten. DO NOT OVERTIGHTEN. 3.