Front Panel Section - Vestax PMC-05ProSL VCA User Manual

ページ 9
@6 MIX VOLUME
It is the volume which adjusts the master output
level of SAMPLER / DELAY. When you want to
monitor the signal outputted from SAMPLER /
DELAY by headphone, please set this volume
minimum.
@7 E FFECT CUE SWITCH
It is the switch for monitor sound of SAMPLER /
DELAY by headphone. When the switch is
pushed, MONITOR SELECT switch is changed to
a MASTER/EFFECT CUE sides, you can monitor
of the signal outputted from SAMPLER / DELAY.
When a switch is on, EFFECT CUE indicator lights
up.
EFFECT CUE INDICATOR
@8
It is the indicator which tells ON/OFF state of
EFFECT CUE switch. The light is up when a
EFFECT CUE switch is on.

FRONT PANEL SECTION

32
34
33
35
#2 MIC input jack
It is the input jack for MIC.
MIC EFFECT SWITCH
#3
It is the select switch which sends the signal of a
MIC channel to built-in SAMPLER/ DELAY. If it
pushed, a signal will be sent to SAMPLER /
DELAY, and MIC EFFECT SEND indicator will
light up.
MIC EFFECT INDICATOR
#4
LED will light up when MIC EFFECT switch is
pushed.
MIC
MIC IN
EFFECT
LEVEL
MIN MAX
@9 LEVEL/PLAY VOLUME
It is the volume which adjusts the effect level of
SAMPLER / DELAY. In the SAMPLER mode,
the fader operates start/stop of a phrase of
sampling. If volume is raised, it will start
playback with the level according to the scale of
the volume, and if it is set at minimum, playback
will stop.
CURVE SWITCH
#0
It is the switch which sets up the volume curve
property of LEVEL/PLAY volume. At the time of
the "C" side, level of sound increase rapidly. And
at the "A" side, the level increase loosely. It is
convenient if you use properly in the right time of
DELAY mode and SAMPLER mode.
#1 TAP SWITCH
In the DELAY mode, switch works to set up
delay time. And the button blinks according to
the set-up delay time. In the SAMPLER mode, it
works as a switch for starting. During playback,
the button lights up.
#5
MIC LEVEL VOLUME
It is the volume which adjusts the level of the
microphone connected to MIC input jack.
#6
PHONES (headphone) jack
It is a jack only for headphone. Please use the
stereo headphone over impedance 8ohms.
-8-
RE
43
40
FO
#7
It i
wo
you
is c
up
LIN
#8
It is
pla
pla
sup
#9 PH
It i
tur
add
hea
36
$0 MA
It is
(In
con
LIN
$1 GN
It is
turn
hum
turn