Advertisement
REAR PANEL
MADE IN CHINA UNDER LICENCE OF VESTAX TOKYO, JAPAN
SERIAL NO.
POWER
14 15
!4 POWER SWITCH
The POWER LED that is located on the top
panel is lit when on.
!5 DC IN
Connect to the DC-15 AC adapter.
!6 GND TERMINAL
Connect this terminal to the ground lead of the
turntable. This helps to reduce noise and hum.
!7 INPUT JACK 1
Used for PGM1 input. Connect turntable
equipped with a MM pickup cartridge to PHONO
input. CD players, tape decks, DATs, MDs etc.,
should be connected to LINE input. Line level
musical instruments with stereo outputs such as
Rhythm Machines or Samplers should also be
connected to line inputs.
19
OUTPUT
REC
DC IN
LINE
R
L
DC15V
18
17
WARNING;SHOCK HAZARD-DO NOT OPEN.
AVIS;RISQUE DE CHOC ELELCTRIQUE -NE PAS OUVRIR.
PGM 2
PGM 1
LINE 2
PHONO 2
R
L
R
GND
16
!8 INPUT JACK 2
Used for PGM2 input. Connect as for !7 .
!9 OUTPUT JACK
Connect to the input of a power amplifier. You
can also use another LINE OUT when you need
to have an output besides the main output.
@0 MIC INPUT JACK
Input jacks of connection of a microphone.
7
RISK OF ELECTRIC
SHOCK. DO NOT OPEN
MIC
LINE 1
PHONO 1
L
20
Advertisement
