PMC-05P3/E 03.8.19 2:58 PM ページ 1 Thank you for your purchasing the VESTAX PMC-05ProIII, Professional Mixing Controller. We suggest that you read through this owner's manual thoroughly so that you may enjoy the full use of this product safely and in the knowledge of all its special features and suitable applications.
Page 2
PMC-05P3/E 03.8.19 2:58 PM ページ 2 SPECIFICATION LINE INPUT SECTION PHONO LINE OUTPUT PHONES SECTION SEND FREQUENCY RESPONSE CROSS TALK SN RATIO DIMENSION (W×H×D) WEIGHT NOMINAL INPUT LEVEL -54dBv -10dBv -42dBv -10dBv NOMINAL OUTPUT LEVEL -10dBv 58mW MAX(@47Ω) ‐10dBv 25Hz∼25kHz ≧100dB ≧75dB <0.01%...
Page 3
NEW FEATURES & FEATURES THAT VESTAX MADE STANDARD ・Effects routing. 1 x Effects Send and 1 x Effects Receive means that you can hook up an external effects unit for use during play.
Page 4
PMC-05P3/E 03.8.19 2:58 PM ページ 4 HOW TO CHANGE INPUT SELECT SWITCH q Remove the top panel in the same procedure. (See fig-a) w Remove the 2 screws which fix the switch panel, fix the switch panel, and remove the switch unit from position in mixer.
Page 5
PMC-05P3/E 03.8.19 2:58 PM ページ 5 qMAIN MIC LEVEL Adjusts the input level of the MAIN MIC input. wMIC EQs Adjusts the HI and LOW frequencies for both the MAIN and SUB MIC input. eMIC PAN Adjusts the panning for both the MAIN and SUB MIC.
Connect this terminal to the ground lead of the turntables. @9 P OWER JACK Connect the Vestax DC-15A , AC adaptor. #0 L INE OUT The PMC-05ProIII has two pairs of Line Out jacks sending the same output signal to an external amplification device.
Page 7
PMC-05P3/E 03.8.19 2:58 PM ページ 7 HOW TO CHANGE THE FADER UNIT q Remove the fader knobs. (See fig-a) w Remove the 4 screws which fix the top panel. (See fig-a) Remove the 2 screws which fix the fader panel, and remove the fader unit from position in mixer.
Page 10
PMC-05P3/E 03.8.19 2:58 PM ページ 10 I M P O R T A N T S A F E G U A R D S READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
Need help?
Do you have a question about the PMC-05ProIII DX and is the answer not in the manual?
Questions and answers