CONGRATULATIONS Thank you for your purchasing the VESTAX PMC-05ProIII, Professional Mixing Controller. We suggest that you read through this owner's manual thoroughly so that you may enjoy the full use of this product safely and in the knowledge of all its special features and suitable applications.
READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions-All the safety and operating 11. Lightning-For added protection for this product instructions should be read before the appliance during lightning storm, or when it is left is operated.
Page 6
qMAIN MIC LEVEL Adjusts the input level of the MAIN MIC input. wMIC EQs Adjusts the HI and LOW frequencies for both the MAIN and SUB MIC input. eMIC PAN Adjusts the panning for both the MAIN and SUB MIC. rTRIM (PGM1/PGM2) Adjusts the input level of each channel.
@9 P OWER JACK These jacks are used to connect line level output devices to the PMC-05proIII. Devices with a line Connect the Vestax DC-15A , AC adaptor. AC-14, level of -10dB to 0db, such as CD player, MD #0 L INE OUT players, tape decks, DAT players etc.
HOW TO CHANGE THE FADER UNIT q Remove the fader knobs. (See fig-a) w Remove the 4 screws which fix the top panel. (See fig-a) Remove the 2 screws which fix the fader panel, and remove the fader unit from position in mixer. (See fig-b) Carefully remove the multi-cable connector from the fader unit.
Page 9
HOW TO CHANGE INPUT SELECT SWITCH e Carefully remove the multi-cable connector from the q Remove the top panel in the same procedure. switch unit. (See fig-f) (See fig-a) w Remove the 2 screws which fix the switch panel, fix the r Attach multi-cable connector to new switch unit.