Subscribe to Our Youtube Channel
Related Manuals for JessEm Rout-R-Fence II
Summary of Contents for JessEm Rout-R-Fence II
- Page 1 Rout-R-Fence II Model #04600 TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATORS MANUAL...
- Page 2 THANK YOU FOR CHOOSING Thank you for choosing this product from JessEm Tool Company. We appreciate your support and hope that our product serves you well. This product is designed to provide many years of reliable service provided it is used as intended and taken care of.
-
Page 3: What's In The Box
1/4"-20 Lock Nut F0581 1/4" Thin Jam Nut S0075-8-C 1/4”-20 x 1 1/8” Set Screw S0062-42-C Fence Squaring Nut S0092-7-C Main Fence S0092-11-C Clamp Bracket Alignment Plate F0558 10-32 Lock Nut S0076-8-C Vacuum Mounting Screw JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799... -
Page 4: Warranty Limitations
JessEm Tool Company. We will repair or replace the product at our discretion and JessEm Tool will return shipment to you at no charge. WARRANTY LIMITATIONS This warranty does not cover: •... -
Page 5: Important Safety Precautions
Do not operate any power tool in an explosive atmosphere, in the presence of flammable liquids, gases or dust. Power tools can create sparks which may ignite the fumes or dust. JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799... - Page 6 Adjusting for Different Table Thickness JessEm’s Rout-R-Fence II is designed to accommodate table top thicknesses between 3/4” and 1-1/8”. To set the top thickness, or to change between them, the following...
- Page 7 4. Repeat along the length of the fence until all six set screws are locked in position and the fence is square to the table top. Figure 6 – Checking Fence Faces JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
- Page 8 Torrefied figure 3. Using a hammer, lightly tap the end of hardwoods or laminated products would make each fastener in the fence faces to remove the excellent choices. carriage bolts. JessEm.com FOR TECHNICAL SUPPORT CALL 1-800-436-6799...
Need help?
Do you have a question about the Rout-R-Fence II and is the answer not in the manual?
Questions and answers