Balboa CLIM8ZONE II User And Service Manual page 19

temperature
128 Radiator
error
257 communication failure
264 AC Input low voltage
288 IPM too high temperature
320 Compressor peak current
too high
6. Wifi Connection and Operation
6.1. APP Download
6.1.1. Go to "Google Play Store" or "Apple App Store"
6.1.2. Search for "Smart Life" app, and download. The app icons in the app stores should look like below
2. The air duct is blocked
temperature 1. The heat sink sensor is
short-circuited or open
2. Heat sink fouling
3. The ambient temperature
too high
1. The connector of the
communication
between the main board and
the driver board is in poor
contact or falls off
2. Internal components of the
heat pump damaged
3. The output voltage of the
power supply board in the
module abnormal or no output
1. The input voltage too low
2. The current transformer
damaged
transportation
1. The fan is faulty or the air
duct blocked
2. The ring temperature rises
too fast, resulting in over-
temperature drop too late to
react
3. The power supply voltage
and current too high or too
low
1. Compressor load is too
large;
2. The driver board is faulty
3. The
damaged
2. Ensure proper ventilation
1. Replace the frequency
conversion module
2. Remove dust and scale
from the heat sink
3.
temperature
1. Reconnect and ensure
cable stability
2.
components
3. Replace the power module
1. Ensure that the input
voltage is normal
during 2. Ensure that the current
transformer works properly
1. Replace the fan
2. Ensure that the air duct
unblocked
3.
temperature
4. Ensure that the power
supply voltage and current are
normal
1
temperature, water temperature,
water flow, etc. are within the
operating range of the unit;
compressor is
2. Replace the compressor driver
plate.
3. Replace the compressor
Lower the ambient
Replace the internal
Reduce the ring
Ensure that the ring
19