Balboa CLIM8ZONE II User And Service Manual page 15


Press button to advance to the second password digit and enter "8" by pressing

Press button to submit the password. After entering, select or change parameters by using
buttons

Press button to make entry changes or confirm and return to the viewing status.
Parameter
Parameter name
code
P01
Return Difference for
Target Water Temp.
P02 Reserved
P03 Setting temp. In automatic mode
P04 Cooling setting temp.
P05 Heating setting temp.
P06=TP4 The setting temp. that Exhaust
temp. too high protection
P07=TP0 Recover The setting temp. from the
too high exhaust temp.
P08
Compressor current protection
P09 Inlet water temp. compensation
P10 Reserved
P11 Defrosting cycle
P12 Defrosting enters the temp.
P13 Defrosting time
P14 Desrosting exit temperature
P15 Temp. difference between
defrosting environment and coil
pipe
P16 Ambient temperature of the
defrosting
P17 Expansion valve cycle
P18
Overheat Degree in Heating Mode
System parameter table
Adjust range
1℃~18℃
--
5℃~40℃
8℃~28℃
15℃~40℃
80℃~125℃
50℃~100℃
2A~50A
-5℃~15℃
--
20MIN~90MIN
-15℃~-1℃
2MIN~20MIN
1℃~40℃
0℃~15℃
0℃~20℃
20-90
-5-10
or buttons,
Default value
1℃(2℉)
--
27℃(40℉)
27℃(81℉)
27℃(79℉)
110℃(230℉)
90℃(194℉)
Reserved--Without
this function
0℃(0℉)
--
40MIN
-3℃(27℉)
5MIN
18℃(64℉)
5℃(10℉)
17℃(63℉)
30
3
or
15