System Components, Accessories; System Configuration; Product Overview - Oase 33885 Operating Instructions Manual

System components, accessories

Aquarium Controller
(33885)
OASE Control Aquarium Transformer 120 W
(INT: 33888, GB: 33889)
HighLine Premium LED Power Adapter
(33898)
OASE Control Aquarium Y-Adapter
(33897)
Stream Max Pump Controller
(33919)

System configuration

• The maximum permissible power consumption of the system is limited by the maximum out-
put of the power supply. (See type plate or operating manual for OASE Control Aquarium
Transformer 120 W)
Example: The maximum output of the OASE Control Aquarium Transformer is 120 W. This
means the total of maximum power consumptions of all connected devices (end devices plus
Controller) must not exceed 120 W. (See type plate or operating manual for the connected de-
vice.)
• If you would like to connect end devices with greater power consumption to a Controller out-
put, use a HighLine Premium LED Power Adapter and an additional OASE Control Aquarium
Transformer 120 W. This transformer will then exclusively supply the end device connected to
it.

Product overview

1 Connection OASE Control Aquarium Transformer
2 Connection for device with OASE Control functions from the aquarium-keeping segment.
3 Status LED (→ Operating conditions indicated by the Status LED)
4 Service button (→ Service button functions)
For controlling electrical equipment with OASE Control func-
tions from the aquarium-keeping segment.
For supplying the Controller and end devices with power.
For connecting end devices with increased power consump-
tion that require an additional OASE Control Aquarium Trans-
former 120 W.
For connecting two end devices to one Controller output.
For controlling flow pumps with the Aquarium Controller.
EN
EAC0004
17