Before use
Package contents and transport inspection
The appliance is supplied with the following components as standard:
▯
1 ultrasonic cleaner
▯
1 basket insert
▯
1 bracelet holder
▯
1 spindle with spacer ring
▯
These operating instructions
NOTE
►
Check the package for completeness and for signs of visible damage.
►
If any items are missing or damaged as a result of defective packaging or
insufficient care during transportation, contact the Service hotline (see the
section Service).
Before initial use
■
Remove all packaging materials and all transport locks from the appliance.
Electrical connection
To ensure safe and trouble-free operation of the appliance after making the
electrical connection, please observe the following advice:
DANGER!
Danger due to ultrasonic waves!
►
During the cleaning process, do not touch the inner surface of the stainless
steel bath or the cleaning fluid: ultrasonic waves can cause serious health
damage.
CAUTION!
►
Before connecting the appliance, compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply.
These data must agree so that no damage is sustained by the appliance.
►
Ensure that the mains power cable is not damaged and is not running over
hot surfaces and/or sharp edges.
►
Ensure that the mains power cable is not taut or knotted.
►
Always remove the mains plug from the wall socket after each use.
│
GB │ IE
■
8
SUR 48 C4