Operating Components; Handling And Operation; How Ultrasonic Cleaning Works; Filling The Appliance With Cleaning Fluid - Silvercrest 365237 2101 Operating Instructions Manual

Operating components

Display
ON button
2
3 SET button
4 OFF button
5 Operating LED
6 Lid
Stainless steel bath
7
MAX mark for maximum fill level
8
9 Basket insert for small items
Bracelet holder
Spacer ring
Spindle for a maximum of 2 CDs/DVDs

Handling and operation

This section provides you with important information on handling and using the
appliance.

How ultrasonic cleaning works

The ultrasonic field created in the cleaning fluid during operation generates
rapidly alternately waves with high and low pressure. These waves produce air
bubbles on the surface of the item being cleaned which quickly burst open
again. This process works mechanically on the surfaces of the item and thus
loosens dirt and other residues. It can, however, also deepen already existing
scratches.
Filling the appliance with cleaning fluid
♦ Open the lid
♦ Fill the stainless steel bath
The parts to be cleaned must be covered with the cleaning fluid.
Do not exceed the maximum fill level MAX
the fluid.
NOTE
► Cold, clean tap water is generally best suited as cleaning fluid. The cleaning
effect can be enhanced by the addition of approximately 3 drops of washing-
up liquid. Do not use caustic cleaners, ammonia, bleach or heavily
perfumed detergents.
► The cleaning performance is dependent on the amount of water: the more
water, the lower the cleaning performance.
SUR 48 C4
.
6
with the cleaning fluid.
7
even after placing the item in
8
GB │ IE │
9 ■