Advertisement
Timer Operation
Once you select the timer operation, the
settings are saved in the remote control.
Thereafter, the air-conditioner will start
operating under the same conditions when
you simply push the POWER button on the
remote control.
ON TIMER Setting
You can set ON TIMER to start the unit
automatically at any desired time up to
24 hours as real time.
- Press ON TIMER button. ON symbol
will be shown on the display with
blinking hour number.
- Press either
or
desired hour.
- Press ON TIMER button again to
confirm hour setting and minute
number will be blinking.
- Press either
or
desired minute.
- Press ON TIMER button again to
confirm minute setting. Hour and
minute number will stop blinking. The
unit is now standby for starting
air-conditioner automatically at the set
time.
- To cancel ON TIMER, press ON TIMER
button again.
Note:
• The user can confirm ON TIMER during
ON TIMER setting process by pressing
SEND button.
• If there are no other buttons pressed
within 15 seconds, ON TIMER will be
cancelled, and the LCD display will
return to show clock.
• After pressing ON TIMER button, the
LCD display will show the last on timer
set by user with blinking hour number.
• When ON/OFF TIMER is set, the
present time is not displayed.
• Press CLOCK button to see present
time after ON/OFF TIMER was set. The
LCD display will show present time
about 15 seconds and return to show
ON/OFF TIMER. If user press CLOCK
button during the 15 seconds display
of present time, the operation will be
CLOCK setting and return to ON/OFF
TIMER.
MS-SVU0013-EN
MS-SVU0013-EN.p65
Wireless Remote Control
• In case of power failure, ON TIMER will
be automatically cancelled as there is
no electricity in the air-conditioner;
however, the set time on the remote
control is still displayed due to batteries.
The user has to cancel and set ON
TIMER again or press SEND button to
reactivate ON TIMER when the
electricity is back to normal conditions.
OFF TIMER Setting
You can set OFF TIMER to stop the unit
automatically at any desired time up to
24 hours as real time.
- Press OFF TIMER button. OFF symbol
will be shown on the display with
button to set the
blinking hour number.
- Press either
desired hour.
- Press OFF TIMER button again to
confirm hour setting and minute
button to set the
number will be blinking.
- Press either
desired minute.
- Press OFF TIMER button again to
confirm minute setting. Hour and
minute number will stop blinking. The
unit is now standby for stopping air-
conditioner automatically at the set
time.
- To cancel OFF TIMER, press OFF
TIMER button again.
Note:
• The user can confirm OFF TIMER
during OFF TIMER setting process by
pressing SEND button.
• If there are no other buttons pressed
within 15 seconds, OFF TIMER will be
cancelled, and the LCD display will
return to show clock.
• After pressing OFF TIMER button, the
LCD display will show the last off timer
set by user with blinking hour number.
• When ON/OFF TIMER is set, the
present time is not displayed.
7
• Press CLOCK button to see present
time after ON/OFF TIMER was set. The
LCD display will show present time
about 15 seconds and return to show
ON/OFF TIMER. If user press CLOCK
button during the 15 seconds display
of present time, the operation will be
CLOCK setting and return to ON/OFF
TIMER.
• In case of power failure, OFF TIMER will
be automatically cancelled as there is
no electricity in the air-conditioner;
however, the set time on the remote
control is still displayed due to batteries.
The user has to cancel and set OFF
TIMER again or press SEND button to
reactivate OFF TIMER when the
or
button to set the
electricity is back to normal conditions.
POWERCOOL Mode
POWERCOOL mode rapidly maximizes
the cooling capacity in COOL or DRY
or
button to set the
mode. With this simply mode, the user can
easily get the maximum cooling capacity
and comfort.
- Press
"POWERCOOL" will be shown on the
display.
- The air-conditioner will accelerate
capacity up totally 20 minutes or until
room temperature is lower than 18ºC.
- When POWERCOOL mode completely
operates
"POWERCOOL" will be disappeared
from the display and return to the
former settings before POWERCOOL
mode.
- To cancel POWERCOOL mode, press
POWERCOOL or MODE button again.
Note:
• The LCD display will not show fan
speed and set temperature.
• Fan speed and set temperature cannot
be changed while POWERCOOL mode
is selected.
• In case of power failure, POWERCOOL
mode will be automatically cancelled.
20/7/2007, 11:52AM
POWERCOOL
button.
or
is
cancelled,
7
Advertisement
