Advertisement
Indicators on Infrared Remote
Control
7
1
1. CLOCK
Displays present time.
2. ON TIMER
Display ON TIMER when ON TIMER
is set.
3. OFF TIMER
Display OFF TIMER when OFF TIMER
is set.
4. Transmission Indicator
The transmission indicator lights when
remote control transmits signal to the
indoor unit.
5. SLEEP Mode
Display sleep symbol after activating
SLEEP mode.
6. Set Temperature
Displays the set temperature (15ºC to
30ºC) when FAN or POWERCOOL
mode is selected. The set temperature
will be disappeared until FAN or
POWERCOOL mode is cancelled or
complete.
7. FAN Speed
Display the selected fan speed level:
auto, low, medium, or high.
8. Operation Mode
Displays the current operation mode:
FAN, COOL, or DRY in cooling only
system.
9. SWEEP Function
Displays "SW" when sweep motor is
activated.
10. ECONO Mode
Displays "ECONO" when ECONO
mode is activated.
11. POWERCOOL Mode
Displays "POWERCOOL" when
POWERCOOL mode is activated.
6
MS-SVU0013-EN.p65
Wireless Remote Control
Operation Mode
FAN Mode
4
- Press Mode button to select the
10
operation mode.
6
- "FAN" will be shown on the display
2
when FAN mode is selected.
- Press FAN SPEED button to select the
3
desired fan speed level and the display
will show.
5
8
A
9
11
Auto –> Low –> Medium –> High
Auto, Low, Medium, and High
respectively
Note:
• In FAN mode, the LCD display will not
show set temperature and cannot
adjust set temperature, SLEEP,
ECONO, and POWERCOOL mode.
COOL Mode
- Press Mode button to select the
operation mode.
- "COOL" will be shown on the display
when COOL mode is selected.
- Press either
or
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
A
Auto –> Low –> Medium –> High
Auto, Low, Medium, and High
respectively
6
DRY Mode
- Press Mode button to select the
operation mode.
- "DRY" will be shown on the display
when DRY mode is selected.
- Press either
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
A
Auto –> Low –> Medium –> High
Auto, Low, Medium, and High
respectively
Note:
• In DRY mode, if the compressor stops
working, fan motor and SWEEP
function will be stopped; fan motor and
SWEEP function will operate when
compressor operates.
• SWEEP function will be cancelled
whenever LOUVER function is selected.
• ECONO mode cannot be activated
during DRY mode operation.
button to set the
CLOCK Setting
- Press CLOCK button to set clock and
will be shown on the display with
blinking hour number.
- Press either
clock to the present hour.
- Press CLOCK button again to confirm
hour setting and minute number will be
blinking.
- Press either
clock to the present minute.
- Press CLOCK button again to confirm
minute setting; hour and minute number
will stop blinking and the set time will
be shown on the display.
Note:
• If there are no other buttons pressed
within 15 seconds, clock setting will be
cancelled.
• User can confirm CLOCK setting during
CLOCK setting process by pressing
SEND button.
20/7/2007, 11:51AM
or
button to set the
or
button to set the
or
button to set the
MS-SVU0013-EN
Advertisement
