Page 2
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: EMLRECL SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS 7671) and current Building Regulations.
Page 3
• Remove the two screws on top of the fitting (see Fig. 2) and remove the top cover Fig. 2 Remove screws Cable entry point • Feed the mains cable through the cable entry hole in the top cover • Connect the mains cable into the push-fit terminal block ensuring correct polarity is observed. Live (brown), Neutral (blue) •...
Page 4
If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.
Page 5
• If the luminaire fails any of the above tests, please contact a qualified electrician SUPPLIED BY: (UK) MANUFACTURER ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLE LU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) AUTHORISED REPRESENTATIVE SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY...
Page 6
°C 0~45 TEST RECORD SHEET SIGNED DATE INITIAL COMMISSIONING 3 HOUR TEST FIRST YEAR SECOND YEAR THIRD YEAR FOURTH YEAR FIFTH YEAR MONTH TEST SIGNED DATE SIGNED DATE SIGNED DATE SIGNED DATE SIGNED DATE FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL FUNCTIONAL...
Need help?
Do you have a question about the EMLRECL and is the answer not in the manual?
Questions and answers