Your radio incorporates a scan function allowing selected groups of channels to
be scanned for signals. CB channels can be scanned at a rate of 50 channels per
second.
When a signal is found, scanning will pause to allow the signal to be heard then
resume scanning when the channel is clear again.
SCAN GROUPS
Your radio supports three scan groups:
•
Open Scan: Allows you to sequentially scan from 2 to 80 user-selectable CB
channels.
•
Priority Scan: Allows you to regularly monitor your priority channel while
scanning a group of user-selectable CB channels.
•
Network Scan: Allows a group of radio users to maintain communications
even when the band is congested by monitoring a small group of user
selectable channels. If the operating channel becomes busy with users from
outside your group, Net-Scan will automatically select a new free channel
from the scan group and transparently switch all users in your group to the
new channel.
To select open scan/priority scan/network scan:
1. Press the MENU key.
2. Navigate to SCAN SETTINGS > CB SCAN MEM
You can use the
PROGRAMMING THE SCAN MEMORIES
Each Scan Group has its own separate channel memory allowing you complete
freedom to program your choice of channels into each group.
To add/remove channels from the selected scan memory:
1. Select the required channel using the
2. Check to see if the
XRS-660
SCANNING
or
key to select the required scan option.
icon is displayed on that channel.
or
key.
27