6-6
Switch/ Motor section
6-6-1
Disassembling
1
Remove Hook, Shoe, Carbon brushes and Insulation cover. (6-1-1, 6-2-1, 6-4-1, 6-5-1)
The above disassembly is not necessary if only Switch and Power supply cord are replaced.
[1]
[5]
[3]
[4]
[2]
[2]
Fig.27
[2]
Fig.28
[1]
Fig.29
[1]
Tips
2
Remove Tapping screws 4x18 [1] (5 pcs), then
remove Handle R [2].
3
Remove Tapping screws 4x18 [2] (2 pcs) from
Handle L [1], then remove the following parts:
Strain relief [3]
Cord guard 10-90 [4]
Switch [5]
4
Loosen the screws on Switch [1], then remove
Power supply cord [2] from Switch [1].
15 / 32