Makita JR3051T Repair Manual page 20

Fig.42
[2]
Fig.43
[1]
[2]
Fig.44
[1]
[2]
8
Assemble Switch [2] to Handle L [1], then insert
Lead wires.
[1]
9
Loosen the screws on Switch [1], then insert Lead
wires of Power supply cord [2], and then tighten the
screws.
10
Hold Power supply cord with Strain relief [1] and
Tapping screws 4x18 [2] (2 pcs).
20 / 32