BMW Z4 ROADSTER Owner's Manual page 95

Trunk emergency unlocking
Pull the handle inside the cargo area.
The trunk lid unlocks.
Valet parking mode
Principle
In the valet parking mode, the control display is
disabled. The operation via iDrive is no longer
possible.
E.g., this mode can be used when the vehicle
is handed over for valet parking.
General information
In the valet parking mode, it is not possible
to change vehicle settings via iDrive. Personal
profiles cannot be changed. Personal data
cannot be displayed.
Additionally, the following actions are carried
out:
▷ The volume of the audio system is limited.
▷ The integrated Universal Remote Control is
deactivated.
▷ The Dynamic Stability Control cannot be
turned off.
▷ Depending on the vehicle, the trunk lid can
be locked and disconnected from the cen-
tral locking system.
Online Edition for Part no. 01405A88B63 - VI/23
Opening and closing
Functional requirements
▷ At least one driver profile has been created.
▷ A driver profile or the guest profile is active.
▷ At least one driver profile has an assigned
ConnectedDrive account.
Accessing the menu for the valet
parking mode
Via the switch-off screen
After switching off drive-ready state the
switch-off screen will be displayed. Select the
entry for the valet parking mode on the switch-
off screen.
Via the display bar at the upper edge
of the control display
1. Tip the Controller up.
2. "Valet parking mode"
Via the vehicle settings
1. "CAR"
2. "Settings"
3. "General settings"
4. "Valet parking mode"
Activating the valet parking mode
General information
Before activating the valet parking mode, a
PIN must be set up to be able to deactivate
the valet parking mode at a future time.
The procedure for the PIN input varies de-
pending on the active driver profile.
Driver profile with PIN
A PIN has been stored for the active driver
profile.
It is not necessary to enter another PIN.
1. "Lock tailgate as well"
CONTROLS
95
OwnersManuals2.com