BMW Z4 ROADSTER Owner's Manual page 61

Setting the date format
1. "CAR"
2. "Settings"
3. "General settings"
4. "Date and time"
5. "Date format:"
6. Select the desired setting.
Language
Setting the system language
1. "CAR"
2. "Settings"
3. "General settings"
4. "Language"
5. Select the desired setting.
Setting the units of
measurement
Depending on the national-market version, you
can set the units of measurement for some
values, for instance consumption, distances,
and temperature.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Units"
5. Select the desired setting.
Trip data settings
Principle
The intervals in which the trip data will be reset
can be configured.
Online Edition for Part no. 01405A88B63 - VI/23
General settings
Resetting trip data
1. "CAR"
2. "Settings"
3. "General settings"
4. "Reset trip data"
5. Select the desired setting.
Speed warning
Principle
The speed warning can be used to set a speed
limit. A warning will be issued when this speed
limit is exceeded.
General information
The warning is repeated if the vehicle speed
exceeds the set speed limit again after drop-
ping below it by 3 mph/5 km/h.
Adjusting
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Warning above:"
6. Turn the Controller until the desired speed
is displayed.
7. Press the Controller.
Activate/deactivate
1. "CAR"
2. "Settings"
3. "General settings"
4. "Speed warning"
5. "Speed warning"
CONTROLS
61
OwnersManuals2.com