BMW Z4 ROADSTER Owner's Manual page 212

CONTROLS
Rearview camera
Principle
The rearview camera helps when reverse
parking and maneuvering. The area behind the
vehicle is shown on the control display.
Additionally, assistance functions can be
shown in the display, e.g., help lines.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Check surrounding traffic and vehicle's
surroundings closely and actively intervene
where appropriate.
Overview
Depending on the vehicle equipment:
button in the vehicle
Park assistance button
212
Driver assistance systems
Online Edition for Part no. 01405A88B63 - VI/23
Sensors
The system is controlled by the following sen-
sors:
▷ Rearview camera.
Additional information:
Sensors of the vehicle, refer to page 35.
Turning on/off
Turning on automatically
The system is switched on automatically if se-
lector lever position R is engaged when the
engine is running.
Automatic deactivation during forward
travel
The system switches off when a certain dis-
tance travelled or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle equipment:
switching on/off manually
Press the park assistance button.
▷ On: the LED illuminates.
▷ Off: the LED goes out.
The parking assistance functions are shown
on the control display.
Switching the view via iDrive
If the rearview camera view is not displayed,
change the view via iDrive:
1. If necessary, tilt the Controller to the side.
2. "Rear view camera"
The rearview camera image is displayed.
Functional requirements
▷ The trunk lid is fully closed.
▷ Keep the detection range of the camera
open. Protruding cargo, a rear-mounted
OwnersManuals2.com