IBEX TM60 Manual Of Use And Maintenance page 8

S
EEDER SET UP
To empty the hopper, move lever "4" from position "C" to position "A". After discharge of all seed move again
lever "4" to position "C".
Fill the hopper with seed, now it is necessary to make set up of the machine considering how many Kg of
seed you want to sow each hectare. Refer to the below table operate as follow:
Seed type
Wheat
Corn - Pea
Hemp - Sorghum
Alfalfa
Onion
Depending on the type of seed, operate as follow:
1. Unscrew locking knob then adjust Lever "1" in correct position, screw docking knob.
2. Unscrew locking knob then adjust Lever "2" in correct position, screw docking knob...
3. Adjust position of Sluice gate "3" pulling in direction "A" to open or pushing in direction "C" to close.
Repeat adjustment on all Sluice gates.
PROFESSIONAL SEEDER
Set up
Lever 1
10
8
6
3
3
Set up
Lever 2
2 Totally open
3 Totally open
2 Totally open
1 Half open
1 Half open
Set up
Sluice gate 3
8