Problems Solving; Causes And Solutions - IBEX TM60 Manual Of Use And Maintenance

TROUBLES
Insufficient working depth
Tools don't penetrate
Rotary harrow bounces on the round and vibrates
Rotor compactness, obstruction
Excessive tilling of the soil
Poor tilling of the soil
Tools locking

PROBLEMS SOLVING

-Decrease the forwarding speed
-Tools are not sharpened or damaged
-Broken or damaged tools
-Check the tools assembling
-Foreign objects between hoes - clean
-Decrease the forwarding speed
-Soil too dry and hard
-Soil too wet
-Reduce working depth
-Increase number of revolutions of the rotor
-Increase forwarding speed
- Decrease number of revolutions of the rotor
- Decrease the forwarding speed
-Increase number of revolutions of the rotor
Stones wedged between the tools
-Stop the tractor PTO
-Full rise the machine
-Stop tractor engine then remove the key from the
ignition
-Disconnect the machine from PTO shaft
-Remove the wedged stones
-Connect the PTO shaft to the machine then start
work

CAUSES AND SOLUTIONS

14