Oil Level - Oil Replacement In Gearbox; Oil Level - Oil Transmission Replacement - IBEX TM60 Manual Of Use And Maintenance

GREASING
1.
At the scheduled time on diagram "A", grease point "B".
Greasing point is equipped with greaser HYDRAULIC TYPE MODEL "A" UNI 7663.
To greasing use only MULTIFUNCTIONAL GREASE LITHIUM BASED Type NLGI 2.
O
2. IL LEVEL – OIL REPLACEMENT IN GEARBOX
At the scheduled time on diagram "A" verify the level and replace oil in the gearbox.
To fill oil use only OIL SAE 90.
Gearbox capacity: 1,1 L
a) To check the oil level in gear box, operate as follows:
1. With the machine on level unscrew the level plug "C" and check that oil touches lower hole rim.
2. If the level it's ok screw and lock plug "C".
3. If the level it's low, unscrew plug "D" and fill oil.
4. When the level it's ok screw and lock plugs "C" and "D".
b) To replace oil in the gearbox, operate as follows:
1. With the machine on level unscrew the level plugs "C", "D" and "E" and drain completely oil.
2. Screw the plug "E".
3. Fill new oil through the hole "D" up to oil touches lower hole rim "C".
4. When the level is ok, screw the plugs "C" and "D".
O
3. IL LEVEL – OIL TRANSMISSION REPLACEMENT
At the scheduled time on diagram "A" check the level or replace oil in the transmission.
To fill oil use only OIL SAE 90.
Tank capacity: 5 L.
a) To check the oil in the transmission, operate as follows:
1. With the machine on level unscrew the plug "B" and check that oil touches lower hole rim.
2. If the level is ok, lock the plug "B".
3. If the level is low, fill oil.
4. When the level is ok, lock the plug "B".
12